# CBCT vs panoramic X-ray: what each one shows

> A panoramic X-ray is one flat image, a CBCT scan is a 3D stack of slices. What each shows, what one study found about accuracy, and how the doses compare.

- URL: https://jawviewer.com/blog/cbct-vs-panoramic-x-ray
- Category: Understanding your scan
- Published: 2026-11-21
- Updated: 2026-11-21
- Author: Jaw Viewer
- Reading time: 4 min
- Tags: cbct, comparison, radiation, glossary

## Key points

- A panoramic X-ray is one flat picture of both jaws. A CBCT scan is a 3D block of voxels that can be cut into slices in any direction.
- In one study of 225 biopsy-proven jaw lesions, radiologists named the right first diagnosis 78.7% of the time on CBCT and 64.4% to 70.2% on panoramic images.
- Two panoramic machines measured 14.2 and 24.3 microsieverts in one phantom study, and 19 to 75 microsieverts across equipment in another.
- A 2021 review of implant dentistry found 3D imaging gives a distortion-free view of the site but costs more and exposes the patient to more radiation.

A panoramic X-ray is a single flat image of both jaws and all the teeth. A CBCT scan is a 3D block of data that you can cut into slices in any direction. The two answer different questions, and the research on which one is more accurate is narrower than the usual summaries suggest.

## One picture or a block of data

A panoramic radiograph is made by an X-ray source and detector that travel around the head while the image builds up on one sheet. The resulting image is flat. Bone, teeth and soft tissue at different depths land on top of each other, and the picture cannot be separated into layers afterwards.

A CBCT scan records many X-ray projections in one turn around the head and reconstructs them into a grid of voxels. Because the result is a volume, you can look at it as axial, coronal and sagittal slices (see [axial, coronal and sagittal views explained](https://jawviewer.com/blog/axial-coronal-sagittal-views-explained.md)), as a 3D rendering, or as a curved slice that mimics a panoramic image. [What a CBCT scan shows](https://jawviewer.com/blog/what-a-cbct-scan-shows.md) goes through that in more detail.

*Figure: Axial, coronal and sagittal slices of a sample CBCT scan beside a 3D rendering of the same scan. The same sample scan in three slice directions and in 3D. Sample scan "CBCT-MR Head (DZ-CBCT)", 3D Slicer sample data, donated for use without restrictions. Screenshot from Jaw Viewer.*

## What did one study find about accuracy?

A head-to-head study from Beijing compared the two image types. The authors collected 225 intraosseous jaw lesions (lesions inside the bone) that each had a biopsy-proven diagnosis, along with a panoramic image and a CBCT scan of the same patient. Two oral and maxillofacial radiologists read both sets, listed up to three possible diagnoses and gave a confidence score.[1]

78.7 vs 64.4 %

first diagnosis correct, CBCT vs panoramic, observer 1[1]

78.7 vs 70.2 %

first diagnosis correct, CBCT vs panoramic, observer 2[1]

CBCT also showed more imaging features. The odds of seeing features such as cortical thinning, cortical destruction, expansion of the bone and involvement of the nerve canals differed between the two image types. The authors found that the extra detail on CBCT was greatest in the front of both jaws and in the upper jaw, and that the radiologists were more confident reading CBCT.[1]

> What this study cannot tell you
>
> It looked back at lesions that were already proven by biopsy, and the readers were specialist radiologists. It is one study of one kind of finding. It does not show that CBCT is more accurate for every question, and it says nothing about what is right for an individual person.

## When does a panoramic image already do the job?

A 2021 systematic review of 70 studies on dental implants weighed 2D against 3D imaging. It found that 3D imaging gives a distortion-free evaluation of the implant site and better image quality, along with higher costs and more radiation. The authors wrote that a panoramic X-ray with a reference body often provides sufficient imaging for the 2D case, and that a low-dose CBCT protocol should be used when 3D imaging is needed.[2] That review is about implant dentistry, so it does not carry over to other reasons for imaging.

The European Academy of Dental and Maxillofacial Radiology reached the same kind of position at a general level. Its members agreed 20 basic principles for dental CBCT, drawn from European radiation-protection directives and confirmed through a consensus process.[3] In practice, a clinic that orders a CBCT after a panoramic X-ray is making a call about the question at hand, and it can explain that call if you ask.

## How do the doses compare?

Panoramic X-ray doses are small and vary between machines. In a phantom study with the 2007 weighting factors, one panoramic machine gave 14.2 µSv and another 24.3 µSv.[4] A second study, on a different phantom and equipment, measured an effective dose of 19 to 75 µSv for panoramic radiography, depending on the equipment, and reported that this was higher than earlier figures.[5]

The reason older and newer numbers differ is a change in how the dose is calculated. The salivary glands were given their own tissue weighting for the first time in 2007.[5] The values in the first study came out 32 to 422 percent higher than under the 1990 recommendations for the same exposures.[4]

CBCT figures depend heavily on the field of view and settings. The full numbers, with the field-of-view groups and the CT comparison, are in [radiation dose of CBCT compared with CT and dental X-rays](https://jawviewer.com/blog/radiation-dose-cbct-vs-ct.md). The size of the scanned region is explained in [CBCT field of view](https://jawviewer.com/blog/cbct-field-of-view-explained.md).

## Seeing both from one scan

A CBCT scan can be turned into a panoramic-style image, so one scan gives you the flat overview and the cross-sections of the same spot. Jaw Viewer builds a panoramic view from the scan you open, in Measure (see [panoramic views](https://jawviewer.com/guide/panoramic-views.md)), and shows it next to the cross-sections and an axial slice, so you can follow a structure from one view into another. The background to that is in [panoramic reconstruction from CBCT](https://jawviewer.com/blog/panoramic-reconstruction-from-cbct.md).

A view built from a CBCT scan is a different thing from a panoramic X-ray taken on a dedicated machine. It has the resolution and limits of the CBCT it comes from, and it is for looking, not for a report.

This is general information, not medical advice. Jaw Viewer is not a medical device. Talk to your surgeon, orthodontist or radiologist about your own case.

## Questions and answers

### What is the difference between a panoramic X-ray and a CBCT scan?

A panoramic X-ray is one flat image of both jaws. A CBCT scan records a 3D block of voxels that can be viewed as slices in any direction or as a 3D rendering.

### Does CBCT show more than a panoramic X-ray?

In one study of 225 biopsy-proven jaw lesions, CBCT showed more imaging features than a panoramic X-ray, especially in the front of both jaws and the upper jaw.

### Is a panoramic X-ray less radiation than CBCT?

Usually. Panoramic doses of 14.2 to 75 microsieverts have been measured, depending on the machine. CBCT doses vary more, and the dose article on this site lists them.

### Why would someone have a CBCT after a panoramic X-ray?

A 2021 review of implant dentistry found a panoramic X-ray often sufficient for 2D imaging, with CBCT when 3D is needed. The reason in a given case is the clinic's to explain.

## Terms used

- **CBCT**: Cone beam computed tomography. A scanner that rotates once around the head and records a cone-shaped X-ray beam, common in dentistry and jaw surgery.
- **Panoramic radiograph**: A single flat dental X-ray that shows both jaws and all teeth in one image.
- **Voxel**: A three-dimensional pixel. A scan is a grid of voxels, each with one grey value.

## Sources

1. Mao WY, Lei J, Lim LZ et al. (2021). Comparison of radiographical characteristics and diagnostic accuracy of intraosseous jaw lesions on panoramic radiographs and CBCT. Dentomaxillofac Radiol, vol. 50, pp. 20200165. https://doi.org/10.1259/dmfr.20200165 Retrospective comparison of 225 biopsy-proven lesions read by two radiologists.
2. Kunzendorf B, Naujokat H, Wiltfang J (2021). Indications for 3-D diagnostics and navigation in dental implantology with the focus on radiation exposure: a systematic review. Int J Implant Dent, vol. 7, pp. 52. https://doi.org/10.1186/s40729-021-00328-9 Systematic review of 70 studies, specific to implant dentistry.
3. Ludlow JB, Davies-Ludlow LE, White SC (2008). Patient risk related to common dental radiographic examinations: the impact of 2007 International Commission on Radiological Protection recommendations regarding dose calculation. J Am Dent Assoc, vol. 139, pp. 1237-43. https://doi.org/10.14219/jada.archive.2008.0339 Tissue-equivalent head phantom.
4. Granlund C, Thilander-Klang A, Ylhan B et al. (2016). Absorbed organ and effective doses from digital intra-oral and panoramic radiography applying the ICRP 103 recommendations for effective dose estimations. Br J Radiol, vol. 89, pp. 20151052. https://doi.org/10.1259/bjr.20151052 Anthropomorphic head and neck phantom.
5. Horner K, Islam M, Flygare L et al. (2009). Basic principles for use of dental cone beam computed tomography: consensus guidelines of the European Academy of Dental and Maxillofacial Radiology. Dentomaxillofac Radiol, vol. 38, pp. 187-95. https://doi.org/10.1259/dmfr/74941012

---

Jaw Viewer (https://jawviewer.com). Page index for AI tools: https://jawviewer.com/llms.txt. Not a medical device.
